ADL Pinch Valves and Pressure Pots

Pinch Tube Pens, Pressure Pot Reservoirs & Accessories

adhesivedispensers.co.uk

2018/ 19

Dispensing SoluƟons for Cyanoacrylates, Anaerobics, UV Cure, Primers, Inks, Solvents

hƩps://www.adhesivedispensing.co.uk

Manual Hand Dispensing Systems using the TS1201 Pinch Tube Valve

Size: 127mm L x 34mm D Weight: 36 g Wetted Parts: Polyethylene Viscosity Range: 1 to 45,000 CPS Flow Rate: 0.54 Gallon Per Minute at 60 psi (water) Recommended for dispensing Cyanoacrylate adhesives, solvents, UV cure, low viscosity epoxies, inks, paints, pri- mers, activators, wood glues, craft glues, anaerobic adhe- sives & many more. Because this valve uses plastic tubes that can be replaced in seconds, it is maintenance free and does not require time spent cleaning or purging. The valve uses disposable pinch tubes either clear plastic (for Cyanoacrylates & most other liquids) or black (for UV cure adhesives). The tube features a male luer lock at the tip end (to accept any standard needle/ tapered tips) and a fe- male luer lock connector the other end for fluid lines to a pressure pot, cartridge reservoir or syringe feed. The valve is kept closed (pinched) until the lever is pressed which opens the tube to allow fluid flow. Once the lever is released, the spring loaded rod pushes against the tube to seal and stop fluid flow .

TS1201 Hand Lever Pinch Pen Valve Non-Timed, Hand Controlled Only

The TS1201 Dispensing Pen uses a disposable moulded tube assembly. This valve is designed to handle a wide vari- ety of low to medium viscosity fluids, from adhesives and lubricants to sealants and liquid masks. Gravity or pressure fed, it is ideal for controlled rates of dispensing. Includes pre- assembled applicator pen, spare clear and black pinch tube assemblies, and an assortment of disposable dispensing tips, caps and 24" long clear and black fluid line feed hoses.

Max Fluid Pressure: 60 psi ( 4 Bar) Material Inlet: Female Luer Lock Material Outlet: Male Luer Lock Valve Mounting: n/a Colour: Black Warranty: 1 Year

TS1201

Hand Lever Valve Boxed with All Accessories Hand Lever Valve Only No Accessories Hand Lever Valve Only No Accessories

TS1201-1 TS1201-2

Replacement Pinch Tubes Supplied in sealed packs of (10) tubes

Pinch valves are ideal for dispensing most low to medium viscosity fluids. Using disposable pinch tubes eliminates the need for maintenance and cleaning. Low cost, quick to setup and easy to use. Either dispensing by hand control or on a production line, pinch valves will handle cyanoacrylates, UV cure, anaerobic, inks, paints, solvents, primers and activators. Tubes are easy to assemble for maintenance free dispens- ing. Changing tubes takes seconds. Use clear colour tubes for Cyanoacrylate, Solvents, Threadlockers, Primers. Use the black tubes for UV cure adhesives.

1201-000-004PK 1201-000-006PK 1201-000-005PK 1201-006-000PK

Clear, 2.54mm ID, Female/ Male Luer Clear, 1.78mm ID, Female/ Male Luer Clear, 2.54mm ID, Male/ Male Luer

Clear, 3.17mm ID, Female/ Male Luer 1201-000-004BPK Black, 2.54mm ID, Female/ Male Luer

adhesivedispensers.co.uk sales@adhesivedispensers.co.uk T. +44 (0) 1908 686660

Manual Hand Dispensing Systems using the TS1201 Pinch Tube Valve

Fluid Line Tubes Supplied in sealed packs of (10) tubes

Part Code

Description

TSD126-312PK TSD126-318PK TSD126-318BPK TSD126-118PK TSD126-218PK TSD126-418PK TSD126-324PK TSD126-324BPK TSD126-124PK TSD126-224PK TSD126-424PK TSD126-524PK TSD126-336PK TSD126-336BPK TSD126-136PK TSD126-236PK TSD126-436PK TSD126-360BPK

12” Long, Clear, Female/ Male Luer 18” Long, Clear, Female/ Male Luer 18” Long, Black, Female/ Male Luer 18” Long, Clear, Male Luer/ Open End 18” Long, Clear, Female Luer/ Open End 18” Long, Clear, Female/ Female Luer 24” Long, Clear, Female/ Male Luer 24” Long, Black, Female/ Male Luer 24” Long, Clear, Male Luer/ Open End 24” Long, Clear, Female Luer/ Open End 24” Long, Clear, Female/ Female Luer 24” Long, Clear, Male/ Male Luer 36” Long, Clear, Female/ Male Luer 36” Long, Black, Female/ Male Luer 36” Long, Clear, Male Luer/ Open End 36” Long, Clear, Male Luer/ Open End 24” Long, Clear, Female/ Female Luer 60” Long, Black, Female/ Male Luer

High pressure luer lock fluid lines and feed tubing for safe and leak free transfer of liquids, adhesives and other fluids from pressure pots. Available in a wide range of lengths and configurations. Each polyethylene hose assembly is provided with a mould- ed luer lock fitting on one or both ends. The assembly can be used with other standard luer lock connectors and will handle up to 100 psi pressure. Simple fluid lines for connecting valves to tanks, valve to cartridges, syringe barrels and luer lock fittings. Compatible as feed tubing with most adhesives, liquids, solvents, inks, paints, primers, activators, UV cure and lubricants.

Part Code: TS2250 Capacity: 5 Litre Materials: Stainless/ Aluminium Max Pressure: 75 psi Size: 236mm W x 384mm H Chamber: 162mm x 242mm Weight: 6.4 kg Part Code: TS22100LS Capacity: 10 Litre Materials: Stainless/ Aluminium Max Pressure: 75 psi Size: 310mm W x 415mm H Chamber: 197mm x 285mm Weight: 8 kg Part Code: TS2216 Capacity: 16 Litre Materials: Stainless/ Aluminium Max Pressure: 75 psi Size: 365mm W x 495mm H Chamber: 247mm x 355mm Weight: 10 kg

Pressure Pots CE Approved. 1 Year Warranty

Tanks and pots are used to provide a pressured feed of adhe- sives, UV cure, lubricants, glues, oils, liquids and fluids direct to dispense valves. All tanks are CE certified and supplied with fluid lines, fittings and connectors. Use these pots for providing a controlled feed of liquids without mess or material waste. Select from a range of tank sizes and options.

Part Code: TS1215 Capacity: 500 Gram Materials: Steel/ Aluminium Max Pressure: 60 psi Size: 114.3mm W x 177.8mm H Chamber: 101.6mm x 152.4mm Weight: 2.5 kg Part Code: TS2220 Capacity: 2 Litre Materials: Stainless/ Aluminium Max Pressure: 75 psi Size: 190mm W x 318mm H Chamber: 121mm x 165mm Weight: 4.5 kg

adhesivedispensers.co.uk sales@adhesivedispensers.co.uk T. +44 (0) 1908 686660

Manual Hand Dispensing Systems using the TS1201 Pinch Tube Valve

Precision General Purpose Dispensing Tips Supplied in sealed boxes of (50) tips

Part Code Description

AD712050 AD713050 AD714050 AD715050 AD716050 AD717050 AD718050 AD720050 AD721050 AD722050 AD723050 AD725050 AD726050 AD727050 AD730050 AD732050 AD734025

12GA, Blue, 2.26mm ID, 2.77mm OD 13GA, Red, 1.78mm ID, 2.54mm OD 14GA, Olive, 1.55mm ID, 1..83mm OD 15GA, Amber, 1.37mm ID, 1.65mm OD 16GA, Grey, 1.19mm ID, 1.45mm OD 17GA, Yellow, 1.04mm ID, 1.40mm OD 18GA, Green, 0.84mm ID, 1.27mm OD 20GA, Pink. 0.61mm ID, 0.91mm OD 21GA, Purple, 0.51mm ID, 0.81mm OD 22GA, Blue, 0.41mm ID, 0.71mm OD 23GA, Orange, 0.33mm ID, 0.64mm OD 25GA, Red, 0.25mm ID, 0.51mm OD 26GA, Peach, 0.24mm ID, 0.45mm OD 27GA, Clear, 0.20mm ID, 0.41mm OD 30GA, Lavender, 0.15mm ID, 0,.30mm OD 32GA, Yellow, 0.10mm ID, 0.23mm OD 34GA, Lime, 0.08mm ID, 0.21mm OD

The TE needle series consist of a stainless-steel shaft with a double helix polypropylene hub. This premier line of dispens- ing needles is burr-free, and electro-polished shaft for unob- structed and consistent material flow. In addition they are silicone and chloride free. Designed to dispense most viscosity fluids and adhesives and safe for use to 100 psi. All needle tips are safe to use up to 100 psi air pressure. Luer lock attachment ensures a twist- on to tips and fittings which is safe for use under high pres- sures. Details listed here are for our standard 0.5” Long (12.7mm). Also available in tube lengths of 0.25”, 1.0”, 1.5” and 2.0”.

* Please note: AD734025 are 1/4” (6.35mm) long.

* Tips are also available in bulk packs of 500 or 1000.

Part Code Description

AD14TT AD16TT AD18TT AD20TT AD22TT AD25TT AD27TT

14GA, Olive, 1.55mm ID, Stiff Plastic 16GA, Grey, 1.19mm ID, Stiff Plastic 18GA, Green, 0.84mm ID, Stiff Plastic 20GA, Pink. 0.61mm ID, Stiff Plastic 22GA, Blue, 0.41mm ID, Stiff Plastic 25GA, Red, 0.25mm ID, Stiff Plastic 27GA, Clear, 0.20mm ID, Stiff Plastic 27GA, Orange, 0.20mm ID, Stiff Plastic 30GA, Lavender, 0.10mm ID, Stiff Plastic 34GA, Lime, 0.08mm ID, Stiff Plastic

Smooth Flow Tapered Dispensing Tips Supplied in sealed boxes of (50) tips

TN27E

AD30TT AD34TT

TT14-DHUV 14GA, Olive, 1.55mm ID, Soft Plastic TT16-DHUV 16GA, Grey, 1.19mm ID, Soft Plastic TT18-DHUV 18GA, Green, 0.84mm ID, Soft Plastic TT20-DHUV 20GA, Pink. 0.61mm ID, Soft Plastic TT22-DHUV 22GA, Blue, 0.41mm ID, Soft Plastic TT25-DHUV 25GA, Red, 0.25mm ID, Soft Plastic TT27-DHUV 27GA, Clear, 0.20mm ID, Soft Plastic

Tapered tips are typically used with high viscosity pastes & gels because the smooth flow design allows materials to trav- el without restriction. But they can be used with most fluids including less viscous liquids. Our range is high performance tapered tips in 7 gauge sizes from 14 to 27. Suitable for many fluids including solder pastes, fluxes, gels, epoxies, grease, compounds, particle filled materials, adhe- sives, silicones, sealants, UV cure and RTV's. The tapered tip series designed with a double helix threads and universal luer lock to provide secure connection to industrial syringes or dispense valves. ADL tapered tips are certified industrial grade safe for use under high pressures and are silicone-free plastics. All tips are burr-free and provide high levels of con-

* Tips are also available in bulk packs of 500 or 1000.

Adhesive Dispensing Ltd 55 Alston Drive Bradwell Abbey Milton Keynes, Bucks MK13 9HB

Tel. +44 (0) 1908 686660 Fax +44 (0) 1908 686836 Email info@adhesivedispensers.co.uk Website https://www.adhesivedispensers.co.uk

adhesivedispensers.co.uk sales@adhesivedispensers.co.uk T. +44 (0) 1908 686660