ADL Pinch Valves and Pressure Pots

Manual Hand Dispensing Systems using the TS1201 Pinch Tube Valve

Size: 127mm L x 34mm D Weight: 36 g Wetted Parts: Polyethylene Viscosity Range: 1 to 45,000 CPS Flow Rate: 0.54 Gallon Per Minute at 60 psi (water) Recommended for dispensing Cyanoacrylate adhesives, solvents, UV cure, low viscosity epoxies, inks, paints, pri- mers, activators, wood glues, craft glues, anaerobic adhe- sives & many more. Because this valve uses plastic tubes that can be replaced in seconds, it is maintenance free and does not require time spent cleaning or purging. The valve uses disposable pinch tubes either clear plastic (for Cyanoacrylates & most other liquids) or black (for UV cure adhesives). The tube features a male luer lock at the tip end (to accept any standard needle/ tapered tips) and a fe- male luer lock connector the other end for fluid lines to a pressure pot, cartridge reservoir or syringe feed. The valve is kept closed (pinched) until the lever is pressed which opens the tube to allow fluid flow. Once the lever is released, the spring loaded rod pushes against the tube to seal and stop fluid flow .

TS1201 Hand Lever Pinch Pen Valve Non-Timed, Hand Controlled Only

The TS1201 Dispensing Pen uses a disposable moulded tube assembly. This valve is designed to handle a wide vari- ety of low to medium viscosity fluids, from adhesives and lubricants to sealants and liquid masks. Gravity or pressure fed, it is ideal for controlled rates of dispensing. Includes pre- assembled applicator pen, spare clear and black pinch tube assemblies, and an assortment of disposable dispensing tips, caps and 24" long clear and black fluid line feed hoses.

Max Fluid Pressure: 60 psi ( 4 Bar) Material Inlet: Female Luer Lock Material Outlet: Male Luer Lock Valve Mounting: n/a Colour: Black Warranty: 1 Year

TS1201

Hand Lever Valve Boxed with All Accessories Hand Lever Valve Only No Accessories Hand Lever Valve Only No Accessories

TS1201-1 TS1201-2

Replacement Pinch Tubes Supplied in sealed packs of (10) tubes

Pinch valves are ideal for dispensing most low to medium viscosity fluids. Using disposable pinch tubes eliminates the need for maintenance and cleaning. Low cost, quick to setup and easy to use. Either dispensing by hand control or on a production line, pinch valves will handle cyanoacrylates, UV cure, anaerobic, inks, paints, solvents, primers and activators. Tubes are easy to assemble for maintenance free dispens- ing. Changing tubes takes seconds. Use clear colour tubes for Cyanoacrylate, Solvents, Threadlockers, Primers. Use the black tubes for UV cure adhesives.

1201-000-004PK 1201-000-006PK 1201-000-005PK 1201-006-000PK

Clear, 2.54mm ID, Female/ Male Luer Clear, 1.78mm ID, Female/ Male Luer Clear, 2.54mm ID, Male/ Male Luer

Clear, 3.17mm ID, Female/ Male Luer 1201-000-004BPK Black, 2.54mm ID, Female/ Male Luer

adhesivedispensers.co.uk sales@adhesivedispensers.co.uk T. +44 (0) 1908 686660