XYZ robot program manual AD300N

can find that the new created Line is added in the Point List interface.

Fig. 1-14 Line End Point

1.6.2.2 Insert Polyline

2.LineMid

1.LineStart

7.LineEnd

6.ArcMid

3.ArcMid

Polyline

4.LineMid

5.LineMid

Fig. 1-15 Polyline Diagram

In the Points List Interface, after the end of the line , press [2] to insert a polyline .

Fig. 1-16 Points Type

Y Step 1(Insert Line start point)

Press the navigation buttons to set the coordinates of the line start point and press

[ENT] to save.

13