XYZ robot program manual AD300N
Fig. 1-11 Points Type Interface
1.6.2.1 Insert Line
Fig. 1-12 Line Diagram
Y Step 1(Insert Line start point)
In the Points Type Interface , press [3] to insert a line .
• Press the navigation buttons (↑ , ↓ , ← , → , z↑ , z↓) of the teach pendant to set
the coordinates of the point and press [ENT] to save, then the system will enter
to the Line end point set interface.
• Press button
• Press [F4] to set the nozzle on at this line startpoint.
Fig. 1-13 Line Start Point
Y Step 2(Insert Line end point)
Press the navigation buttons to set the coordinates of the line end point, press
[ENT] to save, and then the teach box display will direct us to the Point List interface. We
12
Made with FlippingBook - Online catalogs