STEL Range Agitated Pressure Pots User Guide

d. Operation and Stop

Operation The motor rotates when either FWD input or REV input is turned ON.

Stop There are two stopping methods. Deceleration stop: if the signal being ON is turned OFF, the motor decelerated to a stop. Instant stop: if FWD input and REV input are turned ON simultaneously, the motor stops instantaneously.

Below is an example of time chart for when the “external operation signal input” parameter is set to “ON” and the rotation direction switch is set to “FWD” side.

e. Switching the motor rotation direction

When turning the FWD input or REV input ON, the motor rotation direction varies depending on the state of the rotation switch. The rotation direction shown on the side figure is as viewed from the motor input shaft.

page 32