STEL Range Agitated Pressure Pots User Guide

If the rotation direction switch is changed, the motor will decelerate to a stop and start rotating in the direction being switched. If the “external operation signal input” parameter is set to “RE”, the rotation direction switch will be disabled. The rotation direction at which “RE” was set is the same direction as the “FWD” side in the figure above.

Rotation direction of the gearhead output shaft

The rotation direction of the gearhead output shaft varies depending on the type or the gear ratio of the gearhead. Check the operating manual supplied with the motor for the rotation direction of the gearhead output shaft.

f. Function list The following functions are available for this product

page 33