Adhesive Dispensing Catalogue 2011

Universal valve controller Multi-purpose digital valve controller for the operation of all valve types including air operated, spray and motor driven auger types. Multi-purpose digital valve system Universal valve controller Part Code Description TS500R

Digital controller with timer memory

Pressure pots Part Code

The TS500R is a universal valve controller for all metering valves including pinch, diaphragm, needle, spool, piston, spray and auger. It can run at up to 900 cycles per minute, it has an LCD display, memory storage, 0.008 to 60 second timer, +/- 0.001% repeat tolerance, low pressure alarm feature, universal voltage, I/O connector. The display is a clear 20 x 4 segment LCD and shows time and pressure settings in both PSI and BAR. Up to 10 individual program settings can be stored. The TS500R features an adjustable low- pressure alarm for higher levels of control. With a universal power supply, it is a fully 'plug and play' system and can be used immediately, anywhere in the world, with its accompanying tools and accessories. This system uses a highly responsive air pressure management system, coupled with a digital timing circuit and display, to provide consistent, repeatable control over all types of valves.

Description

TS1215 TS1258 TS1265

500 gram pressure pot 0-60 psi 5 litre pressure pot 0-100 psi 19 litre pressure pot 0-60 psi

Syringe barrels Part Code

Description

930-NW 955-NW

30cc syringe/ piston kit pack 20 55cc syringe/ piston kit pack 20

Dispense tips Part Code

Description Tip kit in case

TN00DKIT

48