Adhesive Dispensing Catalogue 2011

Auger valves Motor driven dispense valve for applying repeat dots, controlled beads or potting of most adhesives and liquids. Uses disposable material path (DMP) to eliminate clean-up and maintenance. Operates from a digital dispenser with fluid feed from pressure pot, cartridge or syringe. Rotary valves use a rotary feed screw (auger) to dispense fluid with a positive displacement action, allowing for ultra-precise control of the dispensing process. The unique design ensures that material is constantly present at the feed screw inlet, while the controlled rotation of the feed screw moves the material from the feed to the discharge point. Discrete control of the forward and reverse rotations of the feed screw controls the amount of material discharged. The unique DMP (Disposable Material Path) valve (TS5000DMP) offers a choice of 3 different feed screw sizes (6, 8 and 16-pitch), all made of Delrin. The DMP Valve has a hinged doorway that opens easily so the disposable auger can be removed and replaced within seconds, while the line is still in operation, significantly reducing downtime and waste. The choice of left, right or centre hinge openings makes the valve suitable for mounting on most automated systems.

Motor driven system for solder pastes

Motor driven auger valves Part Code Description TS5000DMP

Auger valve DMP

Accessories Part Code

Description

DMP6-10 DMP8-10 DMP16-10

Feedpaths 6 pitch pack of 10 Feedpaths 8 pitch pack of 10 Feedpaths 16 pitch pack of 10

Controllers Part Code

Description

TS500R

Digital controller 0.008 – 60 sec. timer

Syringe barrels Part Code

Description

930-NW 955-NW

30cc syringe/ piston kit pack 20 55cc syringe/ piston kit pack 20

Dispense tips Part Code

Description Tip kit in case

TN00DKIT

47