XYZ robot program manual AD300N

Rotate the current point A to the specified point A`.

Y Step 2

Rotate the current point B to the specified point B`.

Fig. 2-11 Rotate Diagram

2.5 Points Type

2.5.1 All Types

In the Point List Interface, press [F1] to enter Points Type Interface .

Fig. 2-12 Points Type Interface

Point Type

Description

Point

Isolated point. Usually, it is used for single point process or position. Its only parameter is position. Polyline is composed of lines and arcs. Most of the graphics, including the runway, rounded rectangle, irregular curves can be fitted by polyline. A line segment with directions between two points. It has two parameters: line start and line end. there are three points, generate an arc through them, also the first point is Arc start, the last point is Arc end, the middle point is Arc mid.

Polyline

Line

Arc

26

Made with FlippingBook - Online catalogs