XYZ robot program manual AD300N

Fig. 2-9 End Action

End Action parameters can be used to define what motion is to be taken when the

dispensing completed. It can be set as staying right above the end point, returning to the

start point, reset, returning to the specify point, or connecting to another file.

Type

Description

Parameters

Start Point

The nozzle stay at the starting point of the top of the file The nozzle stay at the end point of the top of the file

Final Z Position

End Point

Final Z Position

Origin Specify Point

Return to origin

Return to the specified point coordinates

Final Position (X, Y, Z)

Next File

Run the connection file after the current file completed.

Final Z Position Next File Name

Table 2-1 End Action Introduce

2.4 Rotate

In the File List Interface, press [5] enter to Rotate Interface .

Fig. 2-10 Rotate Interface

Y Step 1

25