TSR2000-Series-Teach-Pendant-User-Guide-

6.14 How to Create a Polyline (Multiple Joined Lines)

Press twice.

Reference Section 6.3 and 6.20 . From the Insert screen, Select option

Press

Change the move speed with the key

When line start location is reached, press

Press 2

Press 5

Use the alphanumeric keys to change the retract speed, retract height and feed on/feed off delay.

Use alphanumeric keys to change the dispense speed (Pattern Speed).

Press

Press twice.

Press 4

If “GO” is flashing, at the top of the screen

then press

Select where the valve should go to after dispensing.

Use jog keys to move to next position.

Press

(Optional) the alphanumeric keys to select a park location. Use

1

Continue moving to each location and press

2

5

then

Press at the final location to end the pattern.

To save, press

3

4

Starts the dispensing cycle

21