TSR2000-Series-Teach-Pendant-User-Guide-

6.11 How to Create an Arc

Press twice.

Reference Section 6.3 and 6.20 . From the Insert screen, select option 9.

Press

Change the move speed with the key.

When arc start location is reached press

Press 2

Press 5.

Use the alphanumeric keys to change the retract speed, retract height and feed on/feed off delay.

Use alphanumeric keys to change dispense speed (pattern speed).

Press

Press twice.

Press 4

If “GO” is flashing at the top of the screen press

then press

Select where the valve should go to after dispensing.

Use jog keys to move to Arc mid-point location.

(Optional) the alphanumeric keys to select a park location. Use

Press

then

Use jog keys to move to Arc end-point location.

Press

To save, press

Starts the dispensing cycle

.

18