TSR2000-Series-Teach-Pendant-User-Guide-

6.9 How to Create a Single Line (Bead)

Press

Reference Section 6.3 and 6.20 . From the Insert screen, select option 2.

Press 2

Change the move speed with the key.

When line start location is reached press

Use the alphanumeric keys to change the retract speed, retract height and feed on/feed off delay.

Press

Press 5.

Press 4

Use alphanumeric keys to change the dispense speed (pattern speed).

Press twice.

Select where the valve should go to after dispensing.

If “GO” is flashing, at the top of the screen press

(Optional) the alphanumeric keys to select a park location. then Use

then press

Use alphanumeric keys to move the line end location and press

To save, press

Press twice

Press

This starts the dispensing cycle.

16