TS9150-ADV 50ml Cartridge Dispenser System

TS9150-ADV Timed Shot Dispenser High precision consistent deposits of two-component epoxy resins

The TS9150-ADV is a bench top dispensing systems for the controlled application of repeat deposits directly from 50ml dual component type cartridges. Typically for dispensing epoxies, doming resins, polyurethanes, silicones, with repeat deposits. This system uses a timed-shot bench-top dispenser with an adjustable air regulator to set optimum flow rate and a vacuum suck back to pull the 50ml rods back when changing over cartridges. Using the adjustable timer, it allows the user to make repeat shots. Or switch off the timer for making controlled beads of most two component materials. The lightweight and compact size of the rod-driven retainer makes this the ideal bench top dispensing solution for all your sealing, potting, bonding applications. Used with 50ml size dual cartridges and versions available for 1:1, 2:1, 4:1 or 10:1 ratio. And for A-system, B-system and S-system design cartridge types.

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660

TS9150-ADV Timed Shot Epoxy Dispenser

Specification Timer: Output Pressure: Input Pressure:

0.01 to 31 seconds

Up to 100 psi

80-100 psi

Size:

210 x 241 x 70mm

Weight:

2.1kg

Input Voltage: Warranty: Cycle Rate:

100-240 V AC

2 Years

Up to 600 cycles/minute

Timing Tolerances: Meets or Exceeds: Commodity Code:

+/- 0.1%

CE, RoHS, WEEE compliance

85371091

Brand:

Adhesive Dispensing Ltd

Use the TS9150-ADV for applications of most two-component materials supplied in the 50ml dual component cartridges. The plunger rods move down inside the cartridge each time the foot pedal is pressed to deliver a repeat deposit. The simplified construction and operation makes it easy to use for someone who has never used a dispenser before. The unit comes with two modes; manual or pre-set timer. Manual mode keeps dispensing the material whilst the foot pedal is depressed. This kit is supplied with the lightweight aluminium 50ml pneumatic cartridge retainer and air cap with airline hose to attach directly to the dispensing unit. So dispensing direct from filled epoxy tubes is simple. Set the air pressure, the timer and go. Or switch off the timer for making lines and beads. Use the dispenser vacuum suck-back feature to draw back the plunger rods when the car tridge requires changing. The kit includes an instruction guide and user manuals. This machine CE certified and covered by a 2 year warranty. This classic designed benchtop dispenser is simple to use and operate and we offer full technical support for setting up.

Part number

Size 50ml 50ml 50ml 50ml 50ml 50ml

Ratio

Type

9150-ADV-50-11A 9150-ADV-50-11B 9150-ADV-50-21A 9150-ADV-50-21B 9150-ADV-50-41A 9150-ADV-50-41B

1:1 1:1 2:1 2:1 4:1 4:1

A-System Cartridge B-System Cartridge A-System Cartridge B-System Cartridge A-System Cartridge B-System Cartridge A-System Cartridge B-System Cartridge S-System Cartridge

9150-ADV-50-101A 50ml 9150-ADV-50-101B 50ml 9150-ADV-50-101R 50ml

10:1 10:1 10:1

Key Features: • Universal power supply for worldwide use • Adjustable timer to set repeat shots or steady mode for non-timed

• Vacuum suck-back pulls the plunger rods back • Handles low, medium, high viscosity materials

Adhesive Dispensing Ltd 14 Clark Road Milton Keynes, Bucks, MK1 1LG, UK

• Dispense direct from 50ml dual cartridges without material transfer • Compact size for handheld use or can be mounted in a bench stand • Small footprint design and robust build quality • Easy to use for professional results

Tel. +44 (0) 1908 686660 Fax: +44 (0) 1908 686836

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660