TS710SG TS730SG User Manual Guide

Description TS710SG-TSI Manual Syringe Gun

Rev. 1.1

page 4 of 4

4 Setup instructions

1. Press the lock button (2) and insert the push rod (3) to the gun body; make sure the push rod is pushed all the way back. 2. Insert the syringe barrel assembly (1) into the gun assembly and turn clockwise to lock. 3. Install the dispense tip to the syringe barrel outlet. 4. Squeeze the trigger (4) to start dispensing. 5. Press the lock button and pull the push rod back to remove the syringe barrel assembly.

5 Spare parts list

Gun assembly

Item # Replacement component

Description

1 2 3 4 1 2 3 4

71000ROD AD910-WW

Push rod, 10cc

Piston, 10cc Barrel, 10cc

TS710SG

AD910-N

AD900-ORTC 73000ROD AD930-WW

Tip cap

Push rod, 30cc

Piston, 30cc, 55cc

TS730SG

AD930-N

Barrel, 30cc

AD900-ORTC

Tip cap

Adhesive Dispensing Ltd Tel. 01908 686660 Fax 01908 683636 https://www.adhesivedispensers.co.uk info@adhesivedispensers.co.uk