TS710SG TS730SG User Manual Guide

Description TS710SG Manual Syringe Gun

Rev. 1.1

page 1 of 4

Description Manual Syringe Gun Article Numbers: TS710SG, TS730SG

Fig. 1.0

NOTE Please read this guide carefully before first using the device and strictly adhere to the instructions!

This device may only be worked with and worked on by persons who are familiar with this Description and the current regulations for industrial safety and accident prevention.

Keep this Description at a safe place close to the device! The instructions must be available at all times!

Adhesive Dispensing Ltd Tel. 01908 686660 Fax 01908 683636 https://www.adhesivedispensers.co.uk info@adhesivedispensers.co.uk

Description TS710SG-TSI Manual Syringe Gun

Rev. 1.1

page 2 of 4

EC Declaration of Conformity

in accordance with the EC Machinery Directive 2006/42/EC of May 17 th , 2006, Annex II A

We herewith declare, that the design and construction of the machine marketed by us as described below corresponds with the safety requirements of the EC Directive 2006/42/EC. If the machine is modified without our consent, this declaration loses its validity.

Manufacturer

Adhesive Dispensing Ltd 55 Alston Dr, Milton Keynes MK13 9HB, UK

Description

Manual syringe gun, Part No. TS710SG, TS730SG

We declare that the product is in accordance with the following relevant regulations:

The following harmonized European Standards have been applied:

DIN EN ISO 12100

Safety of machinery; basic concepts, general principles for design – Risk Assessment and Risk Reduction (ISO 12100:2000)

Other applied technical standards and specifications:

Authorised representative for the technical documentations:

S Kerr, Adhesive Dispensing Ltd

22 April 2013

(date)

(S Kerr, management)

Adhesive Dispensing Ltd Tel. 01908 686660 Fax 01908 683636 https://www.adhesivedispensers.co.uk info@adhesivedispensers.co.uk

Description TS710SG-TSI Manual Syringe Gun

Rev. 1.1

page 3 of 4

page

Content

Description

3

1

2

Intended use

3

Safety information

3

3

4

Setup instructions

4

5

Spare parts list

4

1 Description The manual syringe gun is a light weight barrel applicator that provides excellent control for low to medium viscosity fluids. Available in 10cc, 30cc, the manual syringe gun is simple to setup and easy to use.

SIZE 10cc 30cc

PART.-NO. TS710SG TS730SG

2 Intended use

The manual syringe gun is used for professional application of different adhesives. Other use than this has not been evaluated and may lead to an unsafe condition.

Use of this manual gun in ways other than those described in this description may result in injury to persons or damage to property.

3 Safety information

WARNING Always read and follow the instructions of the Safety Data Sheet of the used adhesive. Failure to follow may result in personal injury..

Adhesive Dispensing Ltd Tel. 01908 686660 Fax 01908 683636 https://www.adhesivedispensers.co.uk info@adhesivedispensers.co.uk

Description TS710SG-TSI Manual Syringe Gun

Rev. 1.1

page 4 of 4

4 Setup instructions

1. Press the lock button (2) and insert the push rod (3) to the gun body; make sure the push rod is pushed all the way back. 2. Insert the syringe barrel assembly (1) into the gun assembly and turn clockwise to lock. 3. Install the dispense tip to the syringe barrel outlet. 4. Squeeze the trigger (4) to start dispensing. 5. Press the lock button and pull the push rod back to remove the syringe barrel assembly.

5 Spare parts list

Gun assembly

Item # Replacement component

Description

1 2 3 4 1 2 3 4

71000ROD AD910-WW

Push rod, 10cc

Piston, 10cc Barrel, 10cc

TS710SG

AD910-N

AD900-ORTC 73000ROD AD930-WW

Tip cap

Push rod, 30cc

Piston, 30cc, 55cc

TS730SG

AD930-N

Barrel, 30cc

AD900-ORTC

Tip cap

Adhesive Dispensing Ltd Tel. 01908 686660 Fax 01908 683636 https://www.adhesivedispensers.co.uk info@adhesivedispensers.co.uk