TS5540-MS Spray Valve User Guide

TYPICAL SETUP

Flow Control Adjustment

Air Cylinder

Needle & Piston

Actuating Air Input

Atomization Port

Fluid Inlet

Body

Needle Seat

Luer Taper

Luer Cap

SPECIFICATIONS & PART NUMBERS

Dimensions are in inches [mm]

TS5540-MS

Part Number:

Size (Imperial):

4.7'' Length x 1.12'' 119.4mm x 28.4mm

Size (Metric):

.

Weight:

0.73 lb (331g)

Fluid Inlet Port:

⅛'' NPT female

Fluid Outlet Port

Spray cap

Aux Air Inlet Port:

10-32 UNF female 70 psi (4.8bar) Min.

Activation Pressure: Max Fluid Pressure: Operating Frequency:

100 psi (6.9bar)

400+ cycles/min.

Mounting Port:

¼-20 UNC-2B female

Viscosity Range:

1 - 5 000cps

303 SS, Teflon®,

Wetted Parts:

ACCESSORIES

Adhesive Dispensing Ltd 55 Alston Drive Bradwell Abbey Ind Estate Milton Keynes Bucks, MK13 9HB, UK Tel: +44 1908 686660 Fax: 01908 686836 info@adhesivedispensing.co.uk www.adhesivedispensing.co.uk

 Flui d reservoirs: The valve can be fed from the TS1254 , TS2220, TS2250 or TS1258 Pressure Tank, or from any size syringe barrel or ca rtridge.  Dispensing Tips: Precision TT Series dispensing tips, from 14 - 27 gauge, are recommended for this valve type. For the complete dispensing tip offering please visit www.adhesivedispensing.co.uk

Teflon® is a registered trademark of E.I. DuPont. Version 2.00

SOLUTIONS CUSTOMERS STICK WITH ...