TS2220 2L Pressure Pot Data Sheet 2023

2 Litre Pressure Pot Reservoir Stainless Steel Chamber With 0-70 PSI Regulator

The TS2220 Pressure Pot (pressure up to 70 psi) is designed to accommodate all sol vents and adhesives, as well as cyanoacrylates and UV's. It will also accommodate clear and black fittings and tubing in 1/4, 3/8, and 4mm, with stainless steel compression fittings for a continuous fluid path from the reservoir inside the pot to the point of use. Airtight seals ensure no leakage or air entrapment problems. 75 psi operating pressure easily handles fluid with viscosity up to 30,000 CPS. Disposable polyethylene dip tube can be quickly changed. The pressure gauge and pressure regulator are located on top for easy reading and access. Includes fluid line connector kit. When dispensing adhesives, a container or bottle is best placed inside the tank cham ber. Do not pour curable adhesives directly into the pot. Non curing liquids are OK. Main tank body is stainless steel and the lid is aluminium.

Optional PE plastic tank liners are available for this product. These can be used inside the chamber to avoid direct material contact to the stainless steel. Use part code 5000ML-ST-BG10 for the TS2220 pressure pot.

Specifications Part ID:

TS2220

Material: Colour:

Stainless Steel/ Aluminium

Optional electric low level sensor is available for the TS2220 pressure pot. Order part code TS22LS. Or order the 2L pressure pot with this level sensor pre-installed as part code TS2220LS.

Silver Body / Blue Lid

Outer Dimensions: Inner Chamber: Chamber Thickness:

210mm Width x 333.50mm Height 123mm I.D. Width x 190.50mm Height

3mm

Lid Thickness:

15mm

Weight:

3 Kg

Maximum Pressure: Commodity Code:

72.5 PSI - 5 BAR

Key Features: • Easy clean tank chamber • Accurate regulator gauge

84798997

Origin: Quality:

Europe

ADL branded components are constructed of the highest quality materials and assembled so each part is consistent. Fittings are supplied in sealed packs. For consistent dispensing results, use only with compatible parts.

• Safety pressure valve • Includes fluid line fitting • CE approved European product

Scan for webpage

We stock a vast range of dispensing components in different materials. Supplied in sealed boxes. For more information on our tip range, prices and technical information, see here - ACCESSORIES Or download our product catalogue here https://adhesivedispensing.cld.bz/ Adhesive-Dispensing-Ltd-Products-Catalogue-2020

© 2023 Adhesive Dispensing Ltd. All Rights Reserved.

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660

Reasons to use our dispensing components Industrial grade - certified safe for use to 100 psi. Will not break when in use under pneumatic or mechanical pressure. Certified Silicone-Free . Our components will not contaminate fluids placed when in use including specialist adhesives. Burr-free . All blunt tips are electro-polished and produced to a high precision finish. Widest range - we stock millions of parts in many different styles and an extensive range of cartridges, nozzles, mixers. Fast lead times . Most products are held in stock and available within days not weeks. Boxed - most of our tips are supplied in sealed boxes for easy identification and protection against contamination. Batch codes - all labelled with batch codes for traceability. Expert support . We recommend our products to ensure our customers receive the right solution for their application.

Visit our growing customer tech knowledge site for more product information, data sheets, videos and advice. https://www.adhesivedispensing.net/kb_results.asp

Adhesive Dispensing Ltd Unit 14 Clarke Road Mount Farm, Milton Keynes Buckinghamshire, MK1 1LG, UK Tel. +44 (0) 1908 686660 Fax. +44 (0) 1908 686836 info@adhesivedispensers.co.uk https://www.adhesivedispensers.co.uk

© 2022 Adhesive Dispensing Ltd Ref. AD-17820-8