TS1212 Pinch Valves and Pressure Pots

Air Operated Dispensing Systems using the TS1212 Pinch Tube Valve

Compact and easy to set up, this valve is operated by any of our valve controllers. The controller provides a timed pulse of air pressure to open the TS1212 pinch tube, allowing the liquid to flow. A spring loaded shut-off provides the ability to make micro dots if required with no drips between shots. The shot size is determined by the time setting on the controller, the fluid pressure, the amount of opening set on the adjusta- ble stroke control and the size of needle tip used. For complete systems, we offer a range of options including TS1212 valve, pressure pot and controller. The connecting link between reservoir and the TS1212 is a fluid line that offers a safe luer lock connection and is suitable for use with most liquids and adhesives. Use Teflon lined or Teflon tips for cyanoacrylates, General Purpose tips for other fluids and Tapered tips for viscous liquids.

TS1212 Air Operated Pinch Tube Valve Timed, Hand Controlled, Bench Mounted or Robot

The pinch tube valve is a compact and cost effective device for dispensing very thin liquids, semi-viscous materials, cy- anoacrylates, anaerobics, solvents, UV cure adhesives and two-component fluids. For repeat dots, beads or potting of liquids fed from a syringe, cartridge or pressure pot. The only part of the valve that makes contact with the liquid is the low cost replaceable pinch tube assembly. This makes the TS1212 valve ideal for ag- gressive or curable liquids with no risk of the material setting and damaging expensive parts.

Size: 83mm L x 40mm D Weight: 82 g Wetted Parts: Polyethylene

Viscosity Range: 1 to 45,000 CPS Minimum Shot Size: 0.007cc/ ml Repeatability: +/- 0.56% Flow Rate: 2 Litres Per Minute at 60 psi (water) Max

Max Fluid Pressure: 60 psi ( 4 Bar) Material Inlet: Female Luer Lock Material Outlet: Male Luer Lock Valve Mounting: 1/4” 20UNC-2B Warranty: 1 Year

Part Code Description

TS1212

Pinch Valve Boxed with All Accessories

Replacement Pinch Tubes Supplied in sealed packs of (10) tubes

Valve Controllers Timed Shot Pneumatic Valve Units for TS1212 Valve

Part: TS9150 Type: Analog

Timer: 0.01-31 second Air Pressure: 0-100 PSI Voltage: 110/220V Dual Vacuum: Yes Steady Mode: Yes

Pinch valves are ideal for dispensing most low to medium viscosity fluids. Using disposable pinch tubes eliminates the need for maintenance and cleaning. Low cost, quick to setup and easy to use. Either dispensing by hand control or on a production line, pinch valves will handle cyanoacrylates, UV cure, anaerobic, inks, paints, solvents, primers and activators. Tubes are easy to assemble for maintenance free dispens- ing. Changing tubes takes seconds. Use clear colour tubes for Cyanoacrylate, Solvents, Threadlockers, Primers. Use the black tubes for UV cure adhesives.

Part: TS250 Type: Digital

Timer: 0.02-60 second Air Pressure: 0-100 PSI Voltage: 110/220V Dual Vacuum: Yes Steady Mode: Yes

Part: TS350 Type: Digital

Timer: 0.008-60 second Air Pressure: 0-100 PSI Voltage: 110/220V Dual Vacuum: Yes Steady Mode: Yes

1212-002-004PK 1212-004-000PK 1212-004-002PK 1212-004-003PK 1212-004-100PK 1212-004-200PK

Clear, 2.54mm ID, Female/ Male Luer Clear, 1.78mm ID, Female/ Male Luer Clear, 2.54mm ID, Female/ Male Luer Clear, 2.54mm ID, Female/ Male Luer Clear, 3.17mm ID, Female/ Male Luer

Part: TS500R Type: Digital

Timer: 0.008-60 second Air Pressure: 0-100 PSI Voltage: 110/220V Dual Vacuum: Yes Steady Mode: Yes

Clear, 3.17mm ID, Male/ Male Luer 1212-004-002BPK Black, 2.54mm ID, Female/ Male Luer 1212-004-100BPK Black, 3.17mm ID, Female/ Male Luer

adhesivedispensers.co.uk sales@adhesivedispensers.co.uk T. +44 (0) 1908 686660