STEL Range Agitated Pressure Pots User Guide

Alarms and warnings The driver provides alarms that are designed to protect the driver from overheating, poor connection, error in operation, etc...(protective functions), as well as warnings that are output before the corresponding alarms generate (warning functions). If a positive function is activated and an alarm is generated, the motor will coast to a stop, and then the holding power of the motor output shaft is lost. At the same time, the alarm code is displayed. The alarm type can be checked by the alarm code.  Cycle the power to reset the overcurrent and EEPROM error alarms. When cycling the power, turn off the power and wait for minimum 1 minute before doing so. If the motor or controller does not operate properly after the power is cycled, the internal circuit may be damaged. Contact ADL .  The motor stops instantaneously at the time of the external stop (AL6E). After the motor is stopped, the holding power of the motor output is lost.

See list of alarms on the next page.

page 68