STEL Range Agitated Pressure Pots User Guide

2. Chose an area to install the driver. Installation location Install the driver in a well-ventilated place where they can be inspected easily and he following conditions are satisfied: - Indoors - Operating ambient temperature: 0 to 40ᵒC - Operating ambient humidity: 85% or less - Area that is free of explosive atmosphere or toxic gas or liquid - Area not exposed to direct sun - Area free of excessive amount of dust, iron particles or the like - Area not subject to splashing water, oil or other liquids - Area free of excessive salt - Area not subject to continuous vibration or excessive shocks - Area free of excessive electromagnetic noise - Area free of radio active materials, magnetic fields or vacuum - Maximum permitted altitude of up to 1,000m above see level Installing the driver The driver is designed so that heat is dissipated via air convection and conduction through the enclosure. There must be a clearance of at least 25mm and 50mm clearances in the horizontal and vertical directions, respectively, between the driver and the enclosures or other equipment within the enclosures.

When installing the driver, mount it turning the driver front panel to the front side or upper side.

 DO NOT install any equipment that generates a large amount of heat or noise near the driver.

 If the ventilation condition or forcibly cool the area around the driver using a fan in order to keep within the operating ambient temperature.

page 47