STEL Range Agitated Pressure Pots User Guide

b. Changing the rotation direction Change the rotation direction of the motor and gearhead using the rotation direction switch. The rotation direction can be changed while operating.

In case of the gearhead output shaft, the rotation direction varies depending on the gear ration of the gearhead.

c. Operating the motor from a PLC

The motor can be operated and stopped via a PLC.

When the motor is operated and stopped externally, the “external operation signal input” parameter (ioEn) is required to change.

After connecting the operation input signals (FWD input, REV input) to the CN4, set and operate the product as follow:

To set the “external operation signal input” parameter to external operation (ioEn) when operating and stopping the motor via PLC.  “OFF at the time of shipment: The operation using the front panel is set.  Change the “ON” or “rE” for the setting of external operation.

page 30