Epoxy Dispenser Review
Epoxy Dispenser Review
Epoxy Dispensing System s Bench top epoxy dispenser applications are still at the forefront of many manufacturing processes, whether filling heavy duty battery terminals for potting, as well polarity identification, or applying surface mount adhesive to PCBA’s so that delicate electronic components can cope with under PCBA heating. The epoxy dispenser generally connects, via a receiver head, to the material that is supplied in industrial syringes. Ranging in volumes from 3cc to 55cc, there is a syringe barrel capacity that suits any application. Two epoxy dispensers are made available, by Adhesive Dispensing Ltd , TS250 (0-100psi/0-6.9bar) and TS350 (0-100psi/0-6.9bar). Ready to use out of the box, and with their accompanying accessories, the epoxy dispenser can be set-up and ready to use within minutes. Relying on the proven “Time/Pressure” method makes dispensing epoxy hassle-free, whereby an increase or decrease in material output can be easily achieved by an increase or decrease in time, pressure or both. Air powered pistons apply equal pressure throughout the material allowing for consistent and repeatable deposits. Coloured for ease of identification, red straight walled pistons are recommended for reduced stringing and “bouncing” with high viscous material, blue wiper pistons are recommend for general applications and white wiper pistons are a tighter fit for use with low viscosity materials. Wiper versions ensure no residue is left on the syringe walls when the syringe is depleted and reduce fumes . Tip and end caps ensure that contaminants cannot come into contact with the material, when not in use or not connected to the epoxy dispenser and prevent leaks . Dispensing tips, ranging from 1 2 – 3 4 gauge, ensure the epoxy dispenser can achieve a wide variety of dot a bead sizes. In combination with time and pressure and the correct dispensing tip, the system can perform a variety of complex dispensing tasks . The newest addition for handling two-component materials in 50ml 1:1, 2:1 and 4:1 mix ratios are the ADV retainer systems. These are rod driven, pneumatic dispensing accessories that connect directly to the TS250 or TS350 series air-powered dispensers. This setup allows the user to apply small and consistent deposits of 2-part epoxies, polyurethanes, etc. direct from the cartridge and via a static mixer nozzle and luer lock tips. Visit our websites or contact us for full details .
Adhesive Dispensing Ltd 55 Alston Drive Bradwell Abbey Ind Estate Milton Keynes Bucks, MK13 9HB, UK Tel: +44 1908 686660 Fax: 01908 686836 email@example.com www.adhesivedispensing.co.uk
Made with FlippingBook Publishing Software