Contract Repackaging

Custom Filled Dispensing Components

Manually filling syringes with adhesives, silicones, epoxies and other liquids from bulk contain- ers can be time consuming, messy and wasteful. And some liquids contain harmful fumes. Our fluid packaging solutions ensure that customers receive their specified materials packaged in the syringe or cartridge type and size of choice. This includes two component materials.

Pre-Filled Air Syringe Barrels

Syringe barrels are supplied packaged in sizes from 1cc to 500cc for most sin- gle part materials as well as resin pre-mixed and frozen materials. Barrels are silicone free and industrial grade strength for use with even the most aggres- sive adhesives and fluids. We provide syringes filled with your specified material and packaged air-free for controlled dispensing. By receiving your material packaged ready in a high quality barrel, you eliminate the need to transfer from drums, cans or tins. Each barrel is supplied with a data label including batch code, part no., date of fill, shelf life and material safety information. Barrels can be used with a full range of manual or pneumatic guns or when feeding a metering valve system. Pistons are selected to suit the type of material. Flat walled pistons for very high viscosity fluids, dual wiper pistons for lower viscosity fluids, rubber pis- tons for braze pastes. Caps are used to provide an air-tight seal for shipping and storage. All barrels feature a luer lock thread to allow attachment of a dis- pensing tip. Barrels are supplied with reduced air entrapment and include pre-inserted wip- er pistons and cap seals. We only use the highest quality plastic components that are silicone free and industrial grade safe. Syringe barrels can be sup- plied as manual hand assemblies, either with or without graduations or as thick walled barrels for use on air powered dispensers.

1

www.adhesivedispensing.co.uk info@adhesivedispensing.co.uk +44 (0) 1908 686660

Custom Filled Cartridges

Pre-Filled Cartridges

Cartridges are supplied packaged in sizes from 30cc to 960cc with most single part materials as well as resin pre-mixed and frozen materials. Cartridges are silicone free and industrial grade strength for use with even the most aggressive adhesives and fluids. We provide cartridges filled with your specified material & packaged air-free ready for controlled dispensing. By receiving your material packaged in a high quality cartridge, you eliminate the need to transfer from drums, cans or tins. Each cartridge is supplied with a data label including batch code, part no, date of fill, shelf life and material safety information. Cartridges can be used with a full range of manual or pneumatic guns or in cartridge retainers when feeding a me- tering valve system. Plungers are selected to suit the type of material. Low pressure plungers for very high viscosity fluids, dual wiper plungers for lower viscosity fluids. Caps are used to provide an air-tight seal for shipping and storage. All cartridges feature a 1/4" NPT thread to allow attachment of any standard nozzle or any needle tip when used with a needle adapter. Cartridges are supplied with reduced air entrapment and include pre-inserted wiper pistons and cap seals. We only supply the highest quality plastic components that are silicone free and industrial grade safe.

www.adhesivedispensing.co.uk info@adhesivedispensing.co.uk +44 (0) 1908 686660

2

Custom Filled Techkit Cartridges

Techkit Cartridges Two part epoxies, sealants, compounds and silicones can be packaged to any mix ratio inside a Techkit cartridge up to 590cc. The Techkit is a complete, multi-component plastic cartridge assembly which stores, mixes and applies multiple part adhesives, sealants and other materials. Techkit packages are ideal for epoxies, polysulphides, polyurethanes and silicones used in aerospace, electronics, automo- tive, construction, marine and telecommunications industries. The system provides accurate proportioning of the materials as the pre-measured components are stored in separate compartments within the cartridge. This eliminates the time consuming tasks of meas- uring and handling materials whilst eliminating skin contact and harmful fumes. All the material con- tained inside the Techkit cartridge and can be dispensed with zero waste. The Techkit adds value to any mix and dispense application by eliminating material exposure and contamination, substantially reducing waste and guaranteeing the correct ratio of each material is used. The two types of Techkit available are barrier style and injection style. Injection kits are generally used with mix ratios of 10:1 or higher. In this kit, the base material is stored within the cartridge with the cata- lyst stored inside the injection rod. Barrier kits are generally used with lower mix ratios of 1:1 to 10:1 where both materials are kept in the cartridge but separated by a foil barrier in the main cartridge body. Operators can mix the kit manually, semi-automatically or automatically using Techkit mixing equipment. The dasher rod is then quickly removed and a nozzle attached, then placed in a manual or pneumatic dispensing gun.

www.adhesivedispensing.co.uk info@adhesivedispensing.co.uk +44 (0) 1908 686660

3

Custom Filled Techkit Cartridges

www.adhesivedispensing.co.uk info@adhesivedispensing.co.uk +44 (0) 1908 686660

4

Custom Filled Techkit Cartridges

Dual Cartridges Dual component cartridges are available empty or pre-filled with your own specified materials. Typical materials supplied in pre-filled dual cartridges include epoxies, silicones, resins, compounds and adhe- sives. All cartridges are supplied with reduced air entrapment and include pre-inserted wiper pistons and cap seals. Each filled cartridge is packaged into a sealed pack and can include product label with safety de- tails, fill date, shelf life and volume. We only supply the highest quality plastic components that are sili- cone free and industrial grade safe. Twin cartridges are ideal for fixed ratio materials and work with a wide range of manual and pneumatic dispensing guns. Both materials are kept separate, there is no danger of cross contamination. A wide range of fluid viscosities can be packaged eliminating the need for weighing and mixing by hand. Exposure to raw materials is eliminated and so reducing skin complaints and harmful fumes. By using a twin cartridge, material waste is reduced which make packaged cartridges a cost effective solution to any two component fixed ratio adhesive application.

Common Fluids Packaged

Epoxy Resins



We stock a full range of static mixer nozzles for use with the dual cartridges. Standard helical and square nozzles as well as luer lock fittings for precision needle tip attachment. Applicator guns are available for manual, pneumatic or electric dispense from dual cartridges. Sizes range from 50ml to 600ml. New K System dual cartridges are available as manual hand applicator dual syringes in sizes 2.5ml, 5ml and 10ml to offer a smaller kit when handling 2-part materials.

Poƫng Compounds



Doming Resins



Polyurethanes



Silicones



www.adhesivedispensing.co.uk info@adhesivedispensing.co.uk +44 (0) 1908 686660

5

Filled Components

Adhesive Dispensing Limited is a company with extensive industry experience in fluid dispensing appli- cations, adhesives & material repackaging. We strongly believe that the highest quality products, innovative features, competitive pricing, on-time deliveries and customer support are the essential factors that create the successful partnership with our clients. We offer leading edge dispensing systems and industrial dispensing components developed to meet the application demands of your company while maximising your total cost savings. Our components range from a selection of bench-top air-powered dispensers to precision moulded dis- posable components, applicator guns, metering valves, rotary tables and XYZ robots. Adhesive Dis- pensing Limited meets your needs, from supporting low-volume applications, prototype assembly, field based work, automated production cells or high volume assembly lines. Helping customers in aero- space, electronics, automotive, medical device, engineering and general assembly. We offer you the technology and support to increase both efficiency, reduce costs and add value within your company. We also have expertise in providing syringes and barrels contract repackaged with a customers speci- fied adhesive, grease or paste as well as a wide range of performance adhesives. We hold substantial stocks of dispensing products for next day delivery. Please contact us to have a sales engineer visit your site with product samples and provide an equipment demonstration or arrange to visit our MK facility. We look forward to working with you.

QUALITY

Adhesive Dispensing Ltd are an ISO9001:2015 registered firm and our focus is on quality and service to support our customers globally.

REACH

We confirm that Adhesive Dispensing Ltd and our suppliers are active in complying with REACH. We also wish to inform you that no product contains substances which are mentioned in REACH Directive Appendix XV CMR List (Candidate List of Substances of Very High Concern). This is also valid for the appendix from December 16, 2013 (Candidate List of Substances of Very High Concern of Authorisa- tion).

CLP Regulation (Classification, Labelling, Packaging)

We confirm that all chemical products supplied by Adhesive Dispensing Ltd are registered according to the CLP Regulation and are CLP compliant. The change of our MSDS sheets and labelling to the new standard including H- (Hazard Statement) and P- (Precautionary Statement) sentences instead of the known R- (Risk) and S- (Safety) sentences.

RoHS (Restriction of the use of certain hazardous substances in electrical and electronic equipment)

Adhesive Dispensing Ltd confirms that none of its products contain substances which are forbidden to use according to the EC Directive 2011/65/EU.

Adhesive Dispensing Limited 55 Alston Dr. Bradwell Abbey Milton Keynes, Bucks, MK13 9HB, UK

Ref. AD180909-2

6

www.adhesivedispensing.co.uk info@adhesivedispensing.co.uk +44 (0) 1908 686660