Adhesive Dispensing Ltd Catalog

TS5000DMP Rotary Motor Driven Microvalve

The Rotary Valves use a rotary feed screw (auger) to dispense fluid with a posiƟve displacement acƟon, allowing for ultra-precise control of the dispensing process. The unique design ensures that material is constantly present at the feed screw inlet, while the controlled rotaƟon of the feed screw moves the ma- terial from the feed to the discharge point. Discrete control of the forward and reverse rotaƟons of the feed screw controls the amounts of material discharged. The unique DMP (Disposable Material Path) Valve (TS5000DMP) offers a choice of 3 different feed screw sizes (6, 8 and 16-pitch), all made of Delrin®. The DMP Valve has a hinged doorway that opens easily so the disposable auger can be removed and replaced within seconds, while the line is sƟll in operaƟon, significantly reducing downƟme and waste. The choice of leŌ, right or centre hinge open- ings makes the valve suitable for mounƟng on most


automated systems. Typical ApplicaƟons:

Solder paste, die aƩach, surface mount adhesive, chip encapsulaƟon, dam wriƟng, two-part epoxy, UV adhesive. Use valve with TS500R Digital Controller.

Key Features:

• Precise and consistent shot sizes • Motor reverse capability • Field replaceable weƩed parts • Adjustable dispense rate • Closed-loop motor control with encoder feedback (encoder version)



5.88" (149mm)


3.56" (90mm)


0.77 lb. (350 g)

WeƩed Parts:

Delrin®, Viton®, Nylon

Max Fluid Pressure: 30 psi (2.1 bar) Material Inlet: Female Luer Lock Material Outlet: Male Luer Lock MounƟng: 1.0" (25.4mm) Wide

Recommended Viscosity Range:

30K - 1300K cps


Made with FlippingBook - professional solution for displaying marketing and sales documents online