Adhesive Dispensing Catalogue 2011

+

Felt nib dispensing pens 10ml aluminium bodied dispensing pens with chisel felt nib assembly and cap seal. Suited to applying inks, coatings, adhesives, solvents, primers, coatings, RMA, lubricants, water and activators. Spring loaded felt nib allows liquid to flow when pressed against a surface. The nib shuts off to dispense without any drips. The 10ml pen is supplied unassembled ready for filling and dispensing. This pen is also available supplied pre-filled with a specified fluid. Supplied in a sealed pack of 10 pen bodies, nibs and caps. Held like a felt tip pen, this device prevents flooding by releasing material in controlled amounts to the nib. The pen is two parts, cap and reservoir. The reservoir is filled to 0.75" (19mm) of the top; the air chamber allows for the cap to be pressed in position. The pend is primed by depressing the nib while in a vertical position.

Felt nib pens – includes chisel nib assembly and cap Part No QTY FPA-10 (10) 10ml pen, nib and cap FPA-100 (100) 10ml pen, nib and cap FPA-1000 (1000) 10ml pen, nib and cap All pens are supplied ready to fill and assemble. Please contact us if filled pens are required.

24

Made with FlippingBook Learn more on our blog