730007BLPK 30cc/55cc Easy Flow Piston TDS

DATA SHEET

730007BLPK Blue Easy Flow PE Piston 30/55cc

Product Description Part 730007BLPK is a polyethylene air piston with easy flow fit to both the 30cc and 55cc syringe barrels designed to reduce air entrapment and oozing. It consists of a moulded blue polyethylene piston suitable for use with our 30/55cc syringe barrels (700 series) with SyringeGuns and air powered dispensers. Typical Applications Use this 30/55cc piston for dispensing of most low, medium and high viscosity fluids including adhesives, solvents, inks, paints, primers, RTVs, silicones, activators, lubricants, pastes and gels. The piston has a light fit inside the barrel which reduces the effect of stringing and oozing. Instructions 1. Insert piston to a filled 30/55cc 700 series syringe barrel. 2. Push piston down so it sits on top of the liquid level. 3. Push on one side of the inner piston to allow air to escape and ensure the piston moves down without restriction. 4. If using our syringe filling station, push piston into the empty syringe barrel and material will transfer into the syringe pushing the piston up as it fills.

Technical Information

Piston Size: Colour: Diameter: Height: Construction:

30/55cc/ml

Blue

23.00 mm 16.00 mm Polyethylene

Options The 730007BLPK polyethylene pistons are also available in a syringe assembly pre-filled with the adhesive, paste, liquid of your specification. We can provide the syringes in sealed packs without air entrapment. We also have bench standing or hand held syringe filling systems available to fill barrels incorporating this piston. Packaging The 730007BLPK polyethylene piston is supplied in sealed packs of 20 or in bulk packs of 1000. Health & Safety in Use Pistons are safe and hygienic, reducing risk of operator contact with the materials being dispensed. This piston inserts easily in the syringe and is safe for use to 100psi. All plastics are certified silicone free to prevent adhesive contamination. For controlled dispensing, we recommend our TS250 pneumatic timer system rather than manual syringe assemblies or hand guns. Benefits • Silicone free plastics • Safe for use to 100 psi • Compatible with most liquids, adhesives and gels • Effective wiper action without drips • Always available from stock • Available as part of pre-filled syringe Most of our components are available to order direct from stock. Our web shop provides secure and encrypted online purchasing. We also offer credit accounts. Please fax us your order to 0845 652 0059.

730007BLPK 7300LL1NPK: 7550LL1NPK: 730000CRPK: 7015LLPK:

30/55cc Easy Flow PE Piston 30cc Natural Syringe Barrel 55cc Natural Syringe Barrel 30/55cc Syringe Barrel End Cap Universal Syringe Tip Cap Seal

The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment, and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the user’s sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user as a result of the use of this product. Product dimensions and design are approximate and could be subject to change, without notice.

Adhesive Dispensing Ltd Sales & Service Freephone 0800 094 9058

Willow House 20 Craigmore Ave Milton Keynes, MK3 6HD United Kingdom

Tel +44 (0) 845 652 0058 Fax +44 (0) 845 652 0059

Registered in England & Wales Reg. No 6048283 VAT No. 901 8594 21

info@adhesivedispensers.co.uk www.adhesivedispensers.co.uk