Moulded from high density polypro, these dual ratio component cartridges provide a safe and reliable method of filling and dispensing most two-part epoxies, adhesives, and silicones. Cartridges are white colour and feature a standard mixer nozzle attachment. All cartridge components are safe for use to 100 PSI and are silicone free plastics. Cartridges come with dual pistons and a tip cap seal which is removed when attaching static nozzle. Typical Applications Use these cartridges for two component adhesives, gels, pastes, silicones, sealants, epoxies, and PU’s. Once filled with material, cartridges can be used with standard manual and pneumatic dispensing guns.
50ml/ cc Total 1:1 By Volume Up to 100 psi
Max Fluid Pressure
High Density Polypropylene
Cartridges are supplied in packs of 50 or bulk packs of 500.
Pricing and Lead Times
Our cartridges are competitively priced whether in a single box of 50 or in bulk packs. We hold extensive stocks and can ship for fast deliveries. Options Part ABM-25M1 50ml Manual Gun 1:1 Ratio Part ADCBA-25D 50ml Pneumatic Gun 1:1 Ratio Part MA3.0-07S 50ml Mixer Nozzle 7 Elements Part MA3.0-13S 50ml Mixer Nozzle 13 Elements Part MA5.4-17S 50ml Mixer Nozzle 17 Elements Part MA5.4-21S 50ml Mixer Nozzle 21 Elements Part MA6.3-12S 50ml Mixer Nozzle 12 Elements
Health & Safety in Use
Cartridges are safe and hygienic, leak free so reducing risk of operator contact with the materials being dispensed.
Supplied with Dual Pistons and Caps High Density Safe to 100 psi Pressure 1:1 Mix Ratio by Volume Silicone Free Moulded Plastics Use with Manual or Pneumatic Guns
Low Draft Internal Design Available direct from stock
The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the user’s sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user because of the use of this product. Product dimensions and design are approximate and could be subject to change, without notice.