435LL-1 is 35cc/ml size plastic syringe barrel with luer lock tip attachment. It consists of a moulded clear polypropylene syringe barrel suitable for use on any air powered dispenser or as part of our manual syringe assembly.
Use this large 35cc syringe for dispensing of most low, medium and high viscosity fluids including adhesives, solvents, inks, paints, primers, activators, lubricants, pastes and gels. The luer lock end accepts any tip attachment. A large syringe that is ideal for deposits of liquids and gels.
The 435LL-1 syringe is also available pre-filled with the adhesive, paste, liquid of your specification. We can provide the syringes in sealed packs with no air entrapment. We also have bench standing syringe filling systems available to fill this product.
Instructions For Use
1. This syringe can be used as part of a manual syringe assembly (MS435LL-1) or as an air powered syringe dispenser using an air adapter (900-950-3). 2. Once filled, attach any needle tip or tapered tip. This is luer lock and so a tip is twisted on and not pushed on (luer slip). 3. Push in the plastic piston (435L-9) or rubber piston (435L-2) if using a viscous paste or gel. The piston will push out the material without air entrapment. 4. Use a tip cap (part # 7015LLPK) to seal the tip end when not in use. 5. Syringes are disposable and should not be cleaned using solvents which can weaken the plastics if used under air pressure.
The 435LL-1 syringe is supplied in sealed packs of 20 or in bulk packs of 500.
Health & Safety in Use
The 435LL-1 syringe is safe and hygienic, reducing risk of operator contact with the materials being dispensed. This syringe fits comfortably in the hand to minimise the risk of repetitive strain injury. For very high volume dispensing, we recommend our TS250 pneumatic syringe system.
Large capacity 35cc/ml Safe for use to 100 psi
Handles most liquids, adhesives and gels
Clear plastic for visible fluid level Luer lock secure tip attachment
Most of our components are available to order from stock. Our web shop provides secure and safe online purchasing. We also offer credit accounts. Please fax us your order to 0845 652 0059.
Luer lock syringes require the needle tip to be twisted onto the end and not pushed on as with luer slip.
The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment, and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the user’s sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user as a result of the use of this product. Product dimensions and design are approximate and could be subject to change, without notice.
Adhesive Dispensing Ltd Sales & Service Freephone 0800 094 9058
Willow House 20 Craigmore Ave Milton Keynes, MK3 6HD United Kingdom
Tel +44 (0) 845 652 0058 Fax +44 (0) 845 652 0059
Registered in England & Wales Reg. No 6048283 VAT No. 901 8594 21