32 Ounce Manual Pneumatic Electric Dispensing Guns

Manual Version Model AD16-32 Manual Dispensing Gun CE Approved, 1 Year Warranty Precision machined adapter with rubber gasket seal Bayonet twist ‐ on quick a Ʃ ach retainer sleeve to adapter

Hook ring to counter balance the gun if required

Easy release pull back rod with lever

Precision machined lightweight retainer sleeve anodised

Light trigger ac Ɵ on for a controlled fl ow

Speci fi ca Ɵ ons

Features

• • • • • • • •

Trigger Ra Ɵ o: 18:1

Maximum Thrust: 2.5kN Barrel Length: 349.25mm

‐ ‐ ‐ ‐ ‐ ‐ ‐

Light ‐ weight (less than 2kg)

Ergonomic design ‐ giving the operator correct weight balance High power ‐ handles low to medium viscosity pastes and sealants Low maintenance design ‐ simple rubber O ‐ ring gasket seal

Gun Colour: Black Tool Weight: 1.85kg

Barrel Material: Anodised Aluminium

Easy rod retrac Ɵ on lever when cartridge is empty

Handle Material: Coated Steel Approval: CE, REACH, RoHS

Hook ring on trigger top allows gun to be held with a balance

Very easy to use and reliable results

Descrip Ɵ on The Model AD16 ‐ 32 is a manual operated dispensing applicator gun for the controlled applica Ɵ on of sealants, adhesives, po ƫ ng compounds, and other materials packaged in Semco cartridges or in SEMKIT packages. The device is designed for use in the aerospace, automo Ɵ ve and electronics industries and o ff ers the user a low maintenance, reliable and proven method of material dispensing. Each applicator comes with a UK made trigger, a 32oz. threaded metal retainer, a metal adapter, user guide. The gun is supplied pre ‐ assembled ready to use. Recommenda Ɵ ons The Model AD16 ‐ 32 dispensing gun is designed to be used with materials packaged into Semco cartridges of a low to medium viscosity. Addi Ɵ onal sized retainers for this model can be purchased separately in cartridge size op Ɵ ons of 2.5oz., 6oz., 8oz, 10oz. 12oz., and 20oz. This gun is portable and allows for use anywhere. Accessories Adhesive Dispensing Ltd supply precision moulded cartridges, plungers, nozzles, luer lock Ɵ p adapters, and an extensive range of luer lock precision Ɵ ps. When accessories are used with the Model AD16 ‐ 32 dispensing gun, a controlled amount of material is applied in the right loca Ɵ on. This reduces material mess and waste. It saves costly Ɵ me spent applying sealants with lower grade applicators and the high ra Ɵ o 18:1 trigger mechanism reduces operator hand fa Ɵ gue making the whole process safer.