32 Ounce Manual Pneumatic Electric Dispensing Guns

Pneumatic Version Model AD110-32 Pneumatic Dispensing Gun CE Approved, 1 Year Warranty Precision machined adapter with rubber gasket seal Bayonet twist ‐ on quick a Ʃ ach retainer sleeve to adapter

Hook ring to counter balance the gun if required

Air exhaust ensures rapid pressure release to stop material oozing/ drips

Adjustable air regulator to set material fl ow rate

Precision machined lightweight retainer sleeve anodised

Light trigger ac Ɵ on for a very controlled fl ow

1/4” BSP air connec Ɵ on. Op Ɵ onal hoses available

Speci fi ca Ɵ ons

• • • • • • • • •

Maximum Thrust: 2.5kN Barrel Length: 349.25mm

Features

Pressure: To 100 PSI

‐ ‐ ‐ ‐ ‐ ‐ ‐

Handles the Semco 32 ounce cartridges

Air Inlet: 1/4” BSP Male Thread

Ergonomic design ‐ giving the operator correct weight balance High power ‐ handles high viscosity pastes and sealants Low maintenance design ‐ simple rubber O ‐ ring gasket seal Adjustable air ‐ regulator on handle to set correct fl ow rate Hook ring on trigger top allows gun to be supported

Gun Colour: Black Tool Weight: 1.95kg

Barrel Material: Anodised Aluminium Handle Material: Base Moulding, (PC), (ABS)

Approval: CE, REACH, RoHS

Very easy to use and reliable results

Descrip Ɵ on The Model AD110 ‐ 32 is an air powered dispensing gun for the controlled applica Ɵ on of sealants, adhesives, po ƫ ng compounds, and other materials packaged in Semco cartridges or in SEMKIT packages. The device is designed for use in the aerospace, automo Ɵ ve and electronics industries and o ff ers the user a low maintenance, reliable and proven method of material dispensing. Each applicator comes with a 32oz. threaded metal retainer, a metal adapter, user guide and is supplied pre ‐ assembled ready to use. Recommenda Ɵ ons The Model AD110 ‐ 32 dispensing gun is designed to be used with materials packaged into Semco cartridges of any viscosity, low to high. Addi Ɵ onal sized retainers for this model can be purchased separately in cartridge size op Ɵ ons of 2.5oz., 6oz., 8oz, 10oz., 12oz and 20oz. Accessories Adhesive Dispensing Ltd supply precision moulded cartridges, plungers, nozzles, luer lock Ɵ p adapters, and an extensive range of luer lock precision Ɵ ps. When accessories are used with the Model AD110 ‐ 32 dispensing gun, the exact amount of material is applied in the right loca Ɵ on. This reduces material mess and costly waste. It saves costly Ɵ me spent applying materials with less industrial grade applicators and the use of air power reduces operator hand fa Ɵ gue making the whole process safer.