XYZ robot program manual AD300N

3 Logoshop Programming

3.1 Introduction

Logoshop is a set of front-end designing software used in 3D motion control system,

the main goal of which is supplying front-end craft processing and route optimization for

control system, such as dispenser robot 、 laser cut machine.

3.2 Begin To Use

3.2.1 Interface Layout

Similar with other CAD and graphics software, the main interface of Logoshop is

drawing area, above which is menu item and tool bar , the left of which is drawing tools ,

the right of which is craft parameters , below of which is status information . See below:

Fig. 3-1 Logoshop Interface

36

Made with FlippingBook - Online catalogs