XYZ robot program manual AD300N

Fig. 2-3 Normal Array Interface

Group Array will insert the actual points, while the Virtual Array function produces only

some simulated points which will not increase points. Array can be used to create many

groups of the selected points. All the copies will be close to each other.

Press [SHF] to switch array type. Normal Array must be rectangular array as below.

Fig. 2-4 Normal Array Diagram

Normal array composed by five parameters, they are column, line, column offset, line

offset and lift height.

Line Offset is the spacing between the same points of two neighboring lines. Column

Offset indicates the spacing between the same points of two neighboring columns. (Refer

to Fig. 2-4)

The column/Line offset value can be negative value. When the column/row offset is

set to be negative values, the moving will be from right to left or from up to down. Press

—

+/-

button to input the minus mark

. Press the key

again, to remove the minus

+/-

mark -.

22