XYZ robot program manual AD300N

Fig. 1-25 Point Parameters

Just as shown in Fig. 1-25, “****” is the format of default parameter. Press [CLR] can

revert the current parameter to the default parameter.

Point Type

Parameter Type

LineStart/Arc Start

On Delay, Speed, ClsAhead

LineMid

Speed, Corner radius

LineEnd/Arc End

Off Delay, Draw Height, Lift Height, Retract

Table 1-6 Point Parameter

Parameter Type

Scope

On Delay, Draw Height, Lift Height, Retract

Current point

Speed

Current graphic Current graphic

ClsAhead

Table 1-7 Parameter Introduce

1.7 Download and Process

Fig. 1-26 Download

In the File List Interface, press [ENT] to download the teach file , then the system will

enter to the File Process Interface after download completed.

17

Made with FlippingBook - Online catalogs