XYZ robot program manual AD300N

User can set parameters in the ellipse parameters interface, and can also modified

them after teach completed.

The method of inserting coordinates of teach ellipse point are same as the line.

1.6.3 Step

In Points List Interface, press [ENT] to step move point by point. If the position is not

right, press [F2] (Edit) to modify the point position.

1.6.4 Modify Parameter

1.6.4.1 Modify File Parameter

In the File List Interface, press [F4] to enter File Parameter Interface.

Fig. 1-23 File List Interface

Fig. 1-24 File Parameters Interface

All the graphics will be impacted after the user modify the parameters.

1.6.4.2 Modify Point Parameter

In the Points List Interface, press [F4] to edit the parameters of point .

16