TSR2000-Series-Hardware-User-Guide

4. OFF-LINE OPERATION INTERFACE

Caution: when connecting the teaching pendant with the main unit, the buttons on the front panel of the unit are invalid except START/PAUSE, FEED & ORG.

4.1 Off-Line Initialization

1. When the system is turned on without connecting to the teaching pendant, the LCD will enter initialization interface automatically (Refer to Fig.4-1).

LOADING... >>>-----------------

Fig. 4-1: Initialization Interface

2. After 5 seconds, the initialization is complete and the system enters into the file processing interface.

4.2 Off- Line File Processing Interface

1. After initialization, the system will enter the “Processing Interface”. This interface is frequently used when not connected to the teaching pendant. Enter into the other settings interface through the processing interface. 2. In the circulating processing interface, the LCD will display information such as “already processed times /set processing times”.

All information showing on the LCD display are as follows:

Fig. 4-3: Processing Interface of Loop-work

Fig. 4-2: Processing Interface of non Loop-work

File Name

File No.

File Count

SJ001 0001/0002

01/30 STOP

SJ001 N:0003

01/30 STOP

Current Processing Times

Set Times about the Loop-Work

Processing Times

Processing State

3. Enter the “Origin calibration Interface” by pressing the “HOME” button. 4. Enter the “Testing Interface” by pressing the “ESC” button. 5. Enter the “Loop-work Processing Work” by pressing the “LOOP” button. 6. In any sub-menu, return to the “File Processing Interface” by pressing the “ESC” button, but the set parameters will not be saved. 7. In any submenu, press the “ENT” button to save the set parameters and then return to the “Processing Interface”.

4.2.1 Select Processing File

1. Select the processing file with the six directional buttons. 2. “  \  \ Z  ” buttons can be used to select previous file, and “  \  \ Z  ” buttons can be used to select the next file.

21