TSD931-3-1-Data Sheet

TSD931-3-1 Luer Plug Fitting Cap Seal Industrial Component Polypropylene

Male luer lock plug fitting for providing a leak proof seal to any female luer lock fitting. Ideally suited for use with all syringe barrel filling systems. Seals the end of the female luer lock fitting. This fitting has many other applications.. Natural high density polypropylene material. Fittings are supplied in sealed packs. Easily complete your luer fittings systems with these premium quality products. Polypropylene material has a good chemical resistance and can be sterilised via ethylene oxide, or gamma irradiation. This product is available in a range of materials. See the different material descriptions on page 2.

Specifications Part ID:

TSD931-3-1

Material: Colour: Height:

High Density Polypropylene (HDPP)

Natural 10.0mm 10.8mm 4.0mm

Outer Diameter: Inner Luer OD:

Attachment:

Male Luer Lock

Temperature Range: Commodity Code:

-13 to +66 C, 9 to 180 F

39269097

Origin: Brand: Quality:

USA

Adhesive Dispensing Ltd

AD supplied components are constructed of the highest quality materials and assembled so each part is consistent. Fittings are supplied in sealed packs. For consistent dispensing results, use only with compatible parts.

Key Features: • Silicone-Free materials

• Industrial grade safe • Consistent moulding • In sealed packs with labels and batch codes • High quality materials

We stock a wide range of dispensing components in different materials including nickel plated brass and stainless steel. All are supplied in sealed packs or boxes. For more information on our full product range, for prices and technical information, please see here - FITTINGS Or download our product catalogue here https://adhesivedispensing.cld.bz/ Adhesive-Dispensing-Ltd-Products-Catalogue-2020

Scan for webpage

Warning: Industrial grade dispensing products are not approved or intended for, and are not guaranteed to be used specifically for medical, clinical, surgical or other patient oriented applications. Customers should always test and approve plastic fitting parts to satisfy their own use and approvals.

Visit our growing customer tech knowledge site for more product information, data sheets, videos and advice. https://www.adhesivedispensing.net/kb_results.asp

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660

TSD931-3-1 Luer Plug Fitting Cap Seal Industrial Component Polypropylene

Adhesive Dispensing Ltd 14 Clarke Road Bletchley, Milton Keynes Buckinghamshire, MK1 1LG, UK Tel. +44 (0) 1908 686660 Fax. +44 (0) 1908 686836 info@adhesivedispensers.co.uk https://www.adhesivedispensing.co.uk

© 2022 Adhesive Dispensing Ltd. All Rights Reserved.

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660