TS9000 Jet Valve Data Sheet

TYPICAL SETUP

Electronic Module

To regulated air source

Piezo Stack Piezo-Actor Module Tappet Transition Module

Fluid Box Nozzle Unit

Fluid Inlet

Fluid Chamber

JET VALVE SYSTEM SPECIFICATIONS

4 Size Valve (Imperial): Size Valve (Metric): Size Controller (Imperial): Size Controller (Metric): Weight Controller: Minimum Shot Size: Viscosity Range: Fluid Pressure Range: Weight Valve:

3.54'' x 2.98'' x 0.86''

90.0mm x 75.7mm x 22.0mm

4'' x 11.61'' x 5.06''

101.6mm x 295mm x 128.4mm

258g

1600g

2nl

7K to 2000K Cps.

1 to116 psi (0.1 to 8.0bar)

Nozzle Orifice Diameter Range: Max. Dispensing Frequency:

0.07 mm to 0.40mm

1000 Hz

Power Connection: Standard Interface:

10 sets internally; unlimited ext.

Dimensions are in inches [mm]

RS232; 24V/5V PLC

Operating Temperature:

10 to 50°C

For Sales & Support please contact: info@adhesivedispensers.co.uk Adhesive Dispensing Limited

ACCESSORIES

 Nozzle and tappets: A range of nozzles/tappets are made ava ilable to accommodate a variety of output jet deposits.  Hea ter module: The valve’s fluid box can be heated to reduce the viscosity of thicker fluids allowing an increase in flow rates.  For the complete nozzle/tappet and heater offering please visit www.adhesivedispensing.co.uk

55 Alston Drive Bradwell Abbey Milton Keynes Bucks MK13 9HB, UK

Tel: +44 1908 686660 Fax: +44 1908 686836 www.adhesivedispensing.co.uk

Version 2.00

Made with FlippingBook Online newsletter