TS9000 Jet Valve Data-Sheet

TYPICAL SETUP

Electronic Module

To regulated air source

Piezo Stack

Piezo-Actor Module Tappet Transition Module

Fluid Box

Nozzle Unit

Fluid Inlet

Fluid Chamber

JET VALVE SYSTEM SPECIFICATIONS

For Sales and Support:

Size Valve (Imperial): Size Valve (Metric):

3.54'' x 2.98'' x 0.86'' 90.0mm x 75.7mm x 22.0mm 4'' x 11.61'' x 5.06'' 101.6mm x 295mm x 128.4mm 258g 1600g 2nl 7K to 2000K Cps. 1 to116 psi (0.1 to 8.0bar) 0.07 mm to 0.40mm 1000 Hz 10 sets internally; unlimited ext. RS232; 24V/5V PLC 10 to 50°C

4 Size Controller (Imperial): Size Controller (Metric): Weight Valve: Weight Controller: Minimum Shot Size: Viscosity Range: Fluid Pressure Range: Nozzle Orifice Diameter Range: Max. Dispensing Frequency:

Techcon Systems European Corporate Office, Eagle Close, Chandler’s Ford Industrial Estate, Eastleigh, Hampshire, SO53 4NF, UK. Tel: +44 2380 489 100, Fax: +44 2380 489 109 E-mail: europe-orders@okinternational.com

Or visit www.techconsystems.com

Power Connection: Standard Interface: Operating Temperature:

Dimensions are in inches [mm]

ACCESSORIES

 Nozzle and tappets: A range of nozzles/tappets are made available to accommodate a variety of output jet deposits.

 Heater module: The valve’s fluid box can be heated to reduce the viscosity of thicker fluids allowing an increase in flowrates.

For the complete nozzle/tappet and heater offering please visit www.adhesivedispensing,net



LOCAL DISPENSING SOLUTIONS WORLDWIDE

Version 2.00