TS8120 Vacuum Pickup Kit

TS8120 VACUUM PICK & PLACE SYSTEM

COMPLETE SYSTEM INCLUDES: • Vacuum Console Control • Pick Up Pen •

Two Vacuum Tips (15 & 23 Gauge)

Five Rubber Cups

• •

Two 533 Connectors3’ Air hose

INSTALLATION INSTRUCTIONS:

VACUUM

100PSI MAX

VACUUM OUTLET PORT

VACUUM CONTROL KNOB

AIR IN

MADE IN U.S.A.

MOUNTING PADS

TS8120

TO ACCESSORIES AIR OUTLET OF DISPENSER (CONSTANT AIR OUTLET)

OK INTERNATIONAL

1. Attach mounting pads to the bottom surface of the console. 2. Connect one end of the air hose to the vacuum console air inlet port and connect the other end to the accessories air outlet port of the dispenser. 3. Connect the pickup pen to the vacuum inlet port of the console. 4. Attach appropriate tip and vacuum cup to the pickup pen assembly 5. Turn vacuum control knob counter clockwise to set vacuum pressure 6. To pickup part: Hold the pickup pen with the index finger covering the exhaust port. 7. To release part: Remove finger from exhaust port.

Adhesive Dispensing Ltd 55 Alston Drive Bradwell Abbey Ind Estate Milton Keynes

Bucks, MK13 9HB, UK Tel: +44 1908 686660 Fax: 01908 686836

info@adhesivedispensing.co.uk www.adhesivedispensing.co.uk

TSI-0103_D

Tel: +44 1908 686660 Fax: +44 1908 686836 info@adhesivedispensing.co.uk