TS705HP 5cc Syringe Plunger Rod

Adhesive Dispensing TS705HP 5cc Syringe Plunger Rod

DATA SHEET

TS705HP Hand Operated Plunger 5cc

Product Description

Technical Information

The TS705HP is a robust and lightweight manual hand applicator for use with industry standard 5cc type syringe barrels. The reusable plunger attaches to the top of the barrel to provide a simple method of application. It is supplied with an O-ring seal for secure attachment to the barrel. Typical Applications The TS705HP will dispense most low to medium viscosity adhesives, gels, fluxes, and greases. Ideal for use in field applications or remote areas where compressed air is not accessible. Also, suitable for use on re-work or repair applications such as solder paste or solder flux to PCBs. Instructions for Use 1. Pull plunger rod back to top. 2. Take a filled syringe barrel & locate against gun flange, twist clockwise on bayonet. It will lock in place 4. Push plunger rod for liquid to flow. 5. Once the rod touches the wiper piston inside the syringe, material will flow from the needle tip. 6. When the plunger is pulled back slightly, it will prevent adhesive stringing, oozing, or dripping.

Syringe Size:

5cc or 5ml

Colour: Weight: Length: Height:

Black

11.1 gram (without barrel) 82.55 mm (without barrel) 40.64 mm (without barrel)

Construction:

Nylon, EPR

Options

The TS705HP is also available with a full component kit (part # TS705HP-KIT). This kit includes 50 x 5cc clear syringe barrels, 50 x 5cc wiper pistons, 50 x 5cc end cap seals, 50 x tip cap seals, 50 x assorted needle tips. Warranty The TS705HP is provided with a 12-month warranty against fault, failure or defect. Health & Safety in Use The TS705HP is safe and hygienic, reducing risk of operator contact with the materials being dispensed. This gun fits comfortably in the hand for use over long periods of time which minimises the risk of repetitive strain injury. Benefits  Low Cost  Lightweight  Handles many adhesives and liquids  Accepts industry standard syringe barrels  Robust material construction  Portable  Light squeeze for beads and lines  Reusable  Zero maintenance We can offer 30-day payment credit accounts upon application. Credit card payments can be made by phone. Or please fax your orders to +44(0) 845 652 0059 or +44 (0) 1908 686836. Our newly updated website is at www.adhesivedispensing.co.uk

Dispensing components are available to order direct from stock. We ship globally using tracked couriers from our warehouses. Our web shops provide secure & safe encrypted online purchasing.

The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment, and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the user’s sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user as a result of the use of this product.

Tel +44 (0) 1908 686660 Fax +44 (0) 1908 686836

Registered in England & Wales Reg. No 6048283 VAT No. 901 8594 21

Adhesive Dispensing Ltd Sales & Service Freephone 0800 094 9058 Lo-Call: 0845 652 0058

Unit 55, Alston Drive Bradwell Abbey Milton Keynes, MK13 9HB United Kingdom

info@adhesivedispensing.co.uk www.adhesivedispensing.co.uk

Made with FlippingBook flipbook maker