TS6500CIM Automatic Techkit Semkit Mixer User Guide

The cartridge holder can be installed in a few simple steps: 1. Pull the release knob and push the fluid level sensor assembly to the left. 2. Loosen the locking screw by turning it counter clockwise. 3. Rotate the cartridge holder outward and pull it up to remove from the machine. 4. Install new cartridge holder in the reverse order. 5. Pull release knob to rotate fluid level sensor assembly back into position.

CARTRIDGE HOLDER

RELEASE KNOB

FLUID LEVEL SENSOR

LOCKING SCREW

Figure 16.0 Cartridge Holder

20