TS570R Smart Controller Auger Valve

5.8 To Change Password Note: The default password is “0000”. To change password, follow the instructions below. 1. Touch the Login icon to enter the login screen

2. Touch the Run Method icon

3. Enter number of memory to be run in sequence (ex. 1 to 3) 4. Touch the “Sequence Mode” icon

2. Touch the change “Password” icon

5. Touch the Check Mark icon to save and exit The screen will look similarly to the screen below:

3. Enter the old password, then enter the new password

Notes: A. If there is no delay time entered in the setting, the operator has to press the foot switch or touch the Run icon after each memory cell is completed to activate the next memory cell. B. If delay time is entered in the setting, the controller will activate the next memory cell in sequence automatically. 5.5.3 To run in Continuous Sequence Mode 1. Follow step 1 to 2 above, and enter the waiting time “delay time” between each activation. 2. Touch the “Sequence Mode” icon

T

4. Touch the Check Mark icon to save

5. Touch the X icon to exit

20

17