TS5623 Series Hand Lever Diaphragm Valves User Guide

3. THEORY OF OPERATION The TS5623 Series hand operated Diaphragm Valves are normally closed by an internal compression spring (1). Pressing the hand lever (2) drives the piston assembly (3) back, opening the material path allow fluid flow from the material inlet (3) to the material outlet (4). The valve closes instantly when the hand lever is released.

7.2 Standard Accessories:

PART NUMBER 9000-000-100 TSD126-360BK

DESCRIPTION

Sample needles kit

Black fluid line

2

1

4

7.3 Optional Accessories

3

5

TE SERIES NEEDLE

PART NUMBER Gauge

Hub Color

ID(in)

Figure 1.0

14 15 18 20 21 22 23 25 27 30 32

.063 .054 .033 .024 .020 .016 .013 .010 .008 .006 .004

TE714050PK TE715050PK TE718050PK TE720050PK TE721050PK TE722050PK TE723050PK TE725050PK TE727050PK TE730050PK TE732025PK

Olive

4. SETUP INSTRUCTIONS Refer to figure 2.0

Amber Green

1. Connect the fluid reservoir feed tube (1) to the valve inlet port (2). 2. Connect appropriate dispensing tip or nozzle to the fluid outlet port (4). 3. Set the fluid reservoir pressure. Do not exceed 70 psi (4.8 bars) 4. Make sure all connections are tight 5. Place container under the valve outlet and press the hand lever down until the fluid flows steady. The amount of fluid that flows through the valve is determined by: • Fluid reservoir pressure • Dispensing tip size

Pink

Purple

Blue

Orange

Red

Clear

Lavender

PLANT AIR MUST BE PROPERLY FILTERED AND DRY. IF NOT, SPECIFY A 5-MICRON FILTER REGULATOR.

Yellow

TT SERIES NEEDLE

PART NUMBER

Gauge

Hub Color ID (in)

14 16 18 20 22 25 27

.063 .047 .033 .024 .016 .010 .008

TT14-DHUVPK TT16-DHUVPK TT18-DHUVPK TT20-DHUVPK TT22-DHUVPK TT25-DHUVPK TT27-DHUVPK

Olive Grey Green Pink Blue Red Clear

MATERIAL CONSTANT AIR

TS5623HU DIAPHRAGM VALVE

TS1258 PRESSURE POT

Figure 2.0

4

9

Made with FlippingBook - Online catalogs