TS5540 Spray Valve User Guide

4. CONNECTING THE VALVE

2. SPECIFICATIONS

Item #

Description

Size

104.1 x 25.4 mm (4.1” x 1.0”)

1 2 3 4 5 6 7 8

From air source

Weight

331g (0.73lb) 1/8” NPT female 10-32 UNF-2B 10-32 UNF-2B

Air Filter (optional) Constant air flow

Fluid Inlet Port Air Inlet Port

Valve Air Hose (included) Atomize Air Hose (included) Fluid Feed Hose (optional)

Atomize Air Inlet Port

Fluid Pressure

100 psi (6.9 bar) maximum 70 psi (4.8 bar) minimum

Activation Pressure

Wetted Parts

303 stainless steel, Delrin®, Telfon®

Fluid Reservoir (TS1258 - optional) Valve Controller (TS5110 - optional)

Air Cylinder Material Operating Frequency

303 stainless steel

Exceeds 400 cycles/min.

Teflon® and Delrin® are registered trademarks of E.I. DuPont.

3

1

4

2

3. FEATURES

6

5

1

MODE DECIMAL

Items #

Description

2

TS5540

MODE/TIME DISPLAY

MODE/TIME SET

1

Stroke Control Adjustment Knob Valve-actuating Air Inlet Port

8

2 3 4 5

Figure 2.0

Fluid Inlet Port

7

Removable Spray Cap Atomize Air Inlet Port

3

5

5. OPERATING INSTRUCTIONS 1. Set valve air pressure at Valve Controller to 70 psi (4.8 bar). 2. Set the atomize air pressure at Valve Controller according to the viscosity of fluid being spray. 3. Set fluid pressure at Fluid Reservoir according the viscosity of fluid being sprayed; do not exceed 100 psi (6.9 bars). 4. Place a waste bucket under the valve spray nozzle and purge the valve until the fluid flows steadily. Spray coverage is determined by: • Stroke control adjustment – Rotate Stroke Control Knob clockwise to decrease flow rate and counterclockwise to increase flow rate. DO NOT rotate the knob beyond the “Line Marker” which is labeled on the knob shaft. • Length of actuation as set at Valve Controller (the “valve-on” time) • Fluid reservoir pressure • Fluid viscosity • Distance between the spray nozzle and the sprayed surface

Figure 1.0

4

2

3