TS5000DMP-DCX Auger Valve User Guide

SPARE PARTS

9.

6.

TYPICAL SYSTEM SET-UP

NOTE: When replacing the motor (6) and square drive (8), Loctite #86 AVV must be used, to bond the square drive to the motor shaft. The square drive must be flush with the end of the motor shaft and any visible excess must be cleaned off.

Figure 3.0

Figure 5.0

Figure 3.0

Dimensions are in inches (mm)

ITEM PART NUMBER

DESCRIPTION

QTY

1 2 3 4 5 6 7 8 9

TSD1415-12 TSD1401-7 5000-000-171 TSD1103-334 5000-000-346 TSD1412-61 2200-000-011 TSD1103-330 TSD1103-14 TSD1103-10 T1000295

Cable

1 1 1 4 1 1 1 1 3 1 1 1 1 1

Bushing

Sleeve Cap Cap Screw Motor Sleeve

Motor

Motor Mounting Plate

Square Drive

Mounting Plate Screws

10 11 12

Body Screw, Long Body Screw, Short

A0100167 A0100184

Body For TS5000DMP-DCX Body For TS5000DMP-DCXL

12*

13

DMP Insert

See Section 10

Figure 4.0

10

7