The TS5000DMP valve uses a disposable feed screw affording easy maintenance, more accurate and relia- ble dispensing. Made of Delrin®, the disposable feed screw is designed for use with a complete range of ma- terials, including UV. The valve has a hinged doorway that opens easily so the disposable feedscrew can be removed, disposed of, and replaced within seconds without removing the valve from the production system. With standard rotary feedscrew valves, the feedscrew and valve housing wear will cause a gradual deterioration of dispense re- peatability. By changing the disposable feedscrew reg- ularly, dispensing precision integrity can be maintained using the TS5000DMP. The DMP valve is a self-contained dispensing valve, capable of depositing small accurate shots down to 0.020” diameter at rates of 5 or more per second. Flu- ids can be accurately dispensed in continuous beads in widths that range from 0.020” to 0.100” at rates up to 4 per second. &ĞĂƚƵƌĞƐ ŝƐƉĞŶƐŝŶŐ ǁŝƚŚ ŵŽƚŽƌ ƌĞǀĞƌƐĞ ĐĂƉĂďŝůŝƚǇ hs ĐŽŵƉĂƟďůĞ ĞůƌŝŶΠ ŇƵŝĚ ƉĂƚŚƐ ZŽƚĂƟŶŐ ƟƉ ĐŽůůĂƌ ŽƉƟŽŶ ĨŽƌ ďĞŶƚͬŽǀĂů ƟƉƐ ŝƐƉŽƐĂďůĞ ŇƵŝĚ ƉĂƚŚƐ - ŶŽ ĐůĞĂŶŝŶŐ ƌĞƋƵŝƌĞĚ The Disposable Material Path (DMP) valve contains a dis- posable feed screw for easy maintenance and reliable dis- pensing. With the feed screw made of Delrin®, the valve is designed for use with two-compound and UV fluids. The DMP valve has a hinged doorway that opens easily so the disposable feed path can be removed, disposed of, and re- placed within seconds while the line is still in operation. No cleaning or refurbishment of the valve is required.
dǇƉŝĐĂů ƉƉůŝĐĂƟŽŶƐ Laying a solder paste bead in solar cell tabbing Dispensing small deposits of SMA in PCBA production Dispense structural adhesive on flexible PCBA