STEL Range Agitated Pressure Pots User Guide

Electric Motor Operating Safety DO NOT use the product in explosive or corrosive environments, in the presence of flammable gases or near combustibles. Doing so may result in fire, electric shock or injury. ONLY qualified and educated personnel should be allowed to perform installation, connection, operation and inspection/troubleshooting of the product. Handling by unqualified personnel may result in fire, electric shock, injury or equipment damage. DO NOT transport, install the product, perform connections or inspections when the power is on. Always turn the power and pressure off before carrying out these operations. Failure to do so may result in electric shock or equipment damage. symbol indicate the presence of high voltage. Do not touch these terminals while the power is on. Doing so may result in fire or electric shock. The Motor and driver are Class I equipment. When installing the agitated pressure tank, make sure both the motor and driver’s terminal are connected to earth. Failure to do so may result in electric shock. The terminals on the driver marked with !

!

!

Securely connect and ground in accordance with the connection diagram (page 49) . Failure to do so may result in fire or electric shock.

!

DO NOT forcibly bend, pull or pinch the cables. Doing so may result in fire or electric shock.

!

DO NOT machine or modify the motor cable or the connection cable. Doing so may result in electric shock or fire.

!

DO NOT apply excessive force to the motor connector for the connector type. Doing so may result in electric shock or fire.

!

DO NOT remove the connector cap for the connector type until the connection cable is connected so that the O-ring of the connector connection on the motor is not damaged. Doing so may result in electric shock or fire.

KEEP the input power voltage of the driver within the specified range. Failure to do so may result in fire or electric shock.

DO NOT touch the rotating part (output shaft) when operating the motor. Doing so may result in injury.

!

MAKE SURE no fluid has been spilt on the motor before operation. If the motor has been contact with the fluid, disconnect the power immediately and contact ADL for support. Failure to do so may result in fire, electric shock, injury or equipment damage.

CAUTION The motor surface temperature may exceed 70°C even under normal operating conditions. !

page 6