STEL Range Agitated Pressure Pots User Guide

s. Data locking for the set data The data setting can be locked so that the set rotation speed does not change. The setting of data and parameters cannot be changed using the setting dial while locking.

Remove the front panel and perform the operations shown below:

*Even when the top screen (dAtA, PAr) of the data mode or parameter mode is displayed, the data locking or reset locking can be performed.

 Display for when the edit lock function is enabled If the setting value of the operation data or parameter is tried to change, “L6” is displayed for about one second.

t. Limiting the setting range of the rotation speed The setting range of the rotation speed is set to 50 to 4000rpm at the time of shipment. This setting range can be changed to limit.

page 42