STEL Range Agitated Pressure Pots User Guide

k. Items displayed on the driver

Operation mode: Monitor mode

* For the factory setting, the rotation speed is displayed when the power is turned on. The display for when turning on the power can be changed using the parameter.

l. Display of the rotation speed In the case of motors with the JH gearhead, the JB gearhead, and the JV gearhead, use the actual gear ratio about the gear ratio of gearhead. Check the operating manual supplied with the motor for the actual gear ratio.

Displayed digit number when setting the speed reduction ratio or speed increasing ratio

Since the number of significant figures for the integer part is changed if the speed reduction ratio or speed increasing ratio is set, the digit number displayed on the panel will also be changed.

page 39